|
|
| Armor Fence - Built to Last with KDQ |
Armor Fence by Belco Forest Products is 100% non-pressure treated doug fir and
whitewood fencing. Kiln dried to 19% moisture at time of manufacturing, the Armor
Fence total fencing system is produced using The Armor Fence 2-Coat system;
consisting of a primary mold, termite & fungus protective coat followed by a
generous second coat of cedar toned stain. With all this and up to a 20-year limited warranty, we invite you to take the Armor Fence challenge - Dare to compare Armor Fence to any other fencing system and there's only one conclusion... Armor Fence is your total fencing system solution. |
|
|
- 100% Non-Pressure Treated Whitewood & Doug Fir Fencing
- Safer for the environment
- KDQ: Kiln Dried Quality
- Terminates shrinkage & mold
problems
- A Total Fence System From the Same Manufacturer of Armor Coat Trim & Fascia
- One of the highest quality trim
products on the market…
- Total Fencing Solution:
Railing — Trim Boards — End Caps
- The Armor Fence 2-Coat Process: The Next Level of Protection
- First Coat: Mold, fungus & termite
protection
- Second Coat: Generously stained in a beautiful cedar tone... Up to five years before re-application is required*
- 20-Year Limited Warranty on Doug Fir & 15 Years on Whitewood
- Incredible Quality at a Value That’s Difficult to Match...
|
Safe For The Environment
|
- Unlike many other fencing products commonly found on the market, Armor Fence is not made with pressure treated wood and does not have any metallic compounds such as arsenic, lead or copper…
- Armor Fence is made with 100% whitewood and doug fir harvested directly from the great Pacific Northwest.
|
| Armor Fence with KDQ: Kiln Dried Quality |
- Belco guarantees that Armor Fence will be
kiln dried to 19% moisture content at time of manufacturing. Many
competitors claim low moisture content for stability but can’t back it
up, resulting in shrinkage and mold problems… With Armor fence, it’s
guaranteed.
|
The Armor Fence 2-Coat Process with Mold, Fungus &
Termite Protection |
First Coat: Armor Fence is spray coated with mold, fungus and termite protection…
- Termite & fungal decay protection is provided by borate solution
- Borate also acts as a diffusion mechanism, pulling the other spray coat ingredients into the cellulose fiber for
total penetration…
- Inhibitor Solution Prevents Mold
- Most manufacturers mix these ingredients into the
paint, however, green or “stabilized fencing” as it’s often referred
to, has mold spores that already exist which can’t be stopped. A
moldicide mixed with a stain can prevent new spores from forming but
will not kill existing spores present in the green lumber.
- By kiln drying then applying the first coat of the Armor Fence 2-Coat
Process, Belco has eliminated this problem...
Second Coat: Armor Fence is then flood coated with a beautiful cedar
tone stain
- Generously applied at the factory, the cedar stain can last up to five years before re-application is necessary*
|
| Armor Fence Comes with a 20-Year Limited Warranty on Doug Fir & 15 Years for Whitewood |
|
|
|
Contact Belco to discover the Quality & Value we deliver everyday... Belco, Your Partner in Quality
|
|
|